EBC Bluestuff Brake Pads for RS3 TTRS 8V EBC

EBC Bluestuff brake pads for 2017-2020 RS3 and 2018-2021 TTRS 8V with iron rotors. Not for use with carbon ceramic rotors. The Blue pads are excellent for track and street use with a much shorter bed-in time than the Yellowstuff. They are smooth and extra grippy, but will leave behind a medium amount of dust. Sold as a set for front or rear. Please confirm your options in the purchase menu.

Vehicle Fitment:
2017-2020 Audi RS3 8V
2018-2021 Audi TTRS 8V
• For use with iron rotors only
• Not for carbon ceramic rotors

Pictured:
Images are for reference.

More Info:
Bluestuff is an entry level trackday and race pad that has good street manners and is actually R90 approved for street driving. There are two compounds within the Bluestuff range Bluestuff NDX higher friction 0.52 Mu and new Bluestuff B with a lower 0.42 Mu.

However, due to Bluestuff having excellent cold friction and being very controllable, this compound has quickly become the brake pad of choice for performance road car drivers in USA and Asia markets where R90 homologation does not apply. More recently, EBC is pleased to announce that Bluestuff has passed extensive road-focused testing and gained R90 approval on some E.U. fitments, making it unique in being the first truly track-focused pad which is also perfectly legal for use on the public roads across Europe. There is no requirement for E.U. customers to inform their insurance company following the fitment of R90 approved pads.

For customers with experience of EBC’s widely acclaimed Yellowstuff material, Bluestuff boasts a similar friction profile but with a usefully higher friction coefficient across the now larger working range, feeling much like you’d imagine Yellowstuff to feel after a double hit of espresso. Bluestuff has the added benefit of much faster bed in time has a high friction coefficient without feeling grabby, taking things up a notch from EBC’s Yellowstuff material by bringing superb pedal modulation to a track pad with even greater fade resistance.

EBC’s track and race materials are exceptionally kind on brake discs, making them especially desirable for modern performance cars that feature complex and hugely expensive 2-piece brake disc systems from the factory. Customers report that EBC track and race pads are far kinder to brake discs than comparable granite-like semi-metallic pads, which may last longer but take the rotors with them.

EBC Bluestuff Bed-in Procedure:
Fast Street use Pre Bed Fade 1 – drive 50 to 100 miles on Public road/highway normal driving to allow the pads to mate up to the disc and establish full contact followed by 8 stops from 80 mph to 30 mph at 300-yard intervals and then coasting allowing the brakes to cool.

Perform the Street Pre Bed Fade 1 routine as above (either on the road or at the track if installed there ) followed by Fade 2 at the race track.

The latest Bluestuff DM3362 and Low Mu versions should only take Fade 2 and a 15 minute cooling time to be ready to race.

Fade 3 should not be necessary unless poor disc condition has prevented proper seating but if you have time DO perform Fade 3.

Find this complicated – we tend to agree but all organic pads no matter which brand do need some bedding in to avoid loss of brake and a lot depends on rotor condition, the slightest hollow of the rotor surface will extend the bed in times a lot. So being accurate is important.